閥門文件下載
搜索和下載新海閥門產品文獻資料、技術手冊、銷售手冊等文件。
查看更多 >>
新聞 & 活動
2016.05.16
企業質量誠信承諾書
企業質量誠信承諾書     為構建誠信經營、公平競爭的市場環境,加強質量誠信體系建設,切實保證產品質量,維護消費者的合法權益,推動...
2016.03.17
閘閥選用需注意事項
1基本介紹 編輯 閘閥關閉時,密封面可以只依靠介質壓力來密封,即只依靠介質壓力將閘板的密封面壓向另一側的閥座來保證密封面的...
2013.12.24
閥門采購注意事項
1、閥門的型號應注明依據的國標編號要求。若是企業標準,應注明型號的相關說明。 2、閥門制造標準,應說明依據的國標編號,若是企業標準,采購合...
2013.12.24
三通球閥工作原理及特點
法蘭三通球閥簡介: 法蘭三通球閥是一種三通道的回轉型球閥,法蘭三通球閥的閥芯有L型和T型,可以滿足不同的生產工藝要求。可以根據需要,任何一...

法蘭閘閥

Valmax Cast Steel Gate Valve Introduction:
The cast steel gate valves can only be fully opened and fully closed to be used for cutting in the pipeline. The cast gate valves have such features as unlimited installation direction, small disturbed current, low pressure drop, shorter face-to-face dimension, good sealing performance and wide application range. The most important feature of the cast steel gate valve of Valmax Valve Co., Ltd. is that they can be ensured that the permissible leakage rate can be lower than that specified in API 6D and API 600, and the middle shaft sealing can pass the USA VOC leakage test. Valmax Valve Company can provide trims of various materials including materials specified by API 600. We can also provide valves of various casting materials, such as carbon steel, stainless steel, alloy, Hastelloy, nickel chrome, etc.

Valmax Cast Steel Gate Valve Design and Range:
- Design basis: ASME B16.34, GB 12234, API 600.
- Flanged ends: ASME B16.5, GB 9113.
- Butt-welding ends: ASME B16.25.
- Face-to-face dimension: ASME B16.10, GB 12221.
- Inspection and test: API 598, API 6D, JB/T 9092.
- Pressure rating: Class 150 - 2500, PN16 - PN420.
- Product range: 2" - 48", DN50 - DN1200.
- Materials of main parts: WCB, LCB, WC6, WC9, C5, C12.

Valmax Cast Gate Valve Design Features:
- Certified to API 600.
- USA VOC middle shaft micro leakage certification.
- Design of outside screw and yoke (OS&Y).
- Bolted bonnet.
- Pressure self-sealing type bonnet.
- Design of wedge type flexible gate and full guide rail.
- Operation methods: handwheel, bevel gear or electric actuated.
- Overlay welding by hard alloy can be performed on the seat surface according to specifications in API 600.
- Replaceable valve seat and back seat.
- Integral seat and back seat are adopted in stainless steel valves.
? 幸运武林基本走势